Rope for TIRFOR with hook

Professional 4-strand steel rope for TIRFOR type manual pulling machines, with a hook at the end.

diameters 8.4mm and 11.2mm: Galvanized steel rope - 4x26, FC, 1960 N/mm2

diameter 16mm: Galvanized steel rope - 4x36, FC, 1960 N/mm2

Technical data:

• Diameter: 8.4 11.2 and 16 mm
• Length: to choose from
• Construction: 4-strand
• Coil direction: sZ - right anticoil
• Standard: EN 12385-4
  
• Strength: given in the table below
  
• Strength class: 1960 N/mm2
• Surface: galvanized
• Ends: Hook - Point,
  hook type and dimensions are given in the table below
  
• Weight: given in the table below
  

Item description:

Special 4-strand rope for Tirfor type manual pulling machines.

The original TIRFOR® rope was developed as a component in conjunction with the development of the TIRFOR® clamping system and is therefore essential for the trouble-free operation of the TIRFOR® device. Its high strength and dimensional memory, as well as the full-plane grip of the TIRFOR® clamping jaws, guarantee maximum rope and device (jaw) service life.

The rope is terminated on one end with a hook with a safety catch, and on the other end with a tip that facilitates inserting the rope into the Tirfor (manual winch).

THE MANUAL WINCH CAN WORK WITH ALMOST ANY ROPE OF THE REQUIRED DIAMETER, BUT ONLY THE 4-STRAND CONSTRUCTION GUARANTEES:

• USE OF THE FULL POTENTIAL OF THE WINCH
• MAXIMUM ROPE SERVICE LIFE
• THE GREATEST PROTECTION AGAINST THE ROPE SLIPING OUT OF THE WINCH JAWS

Technical parameters
(rope weight x length + weight of ends):

Hook dimensions: